Contract wood drying
350 m³ total capacity across four of our own chambers. We dry oak, walnut, beech and ash — for our own production and as a service to sawmills, joineries, furniture makers and traders.
350 m³ across four chambers
From around 60 % to approx. 7 %
Freshly sawn hardwood typically enters the chamber at around 60 % moisture. We dry as standard to approx. 7 %, and down to approx. 6 % is possible — depending on species, thickness and intended use.
- Oak
- Walnut
- Beech
- Ash
Customer-supplied timber is welcome
You do not have to buy the timber from us. Deliver your own batch, we dry it in our chambers — then you collect it dried, or have it processed further right here.
- customer timber accepted by arrangement
- drying as a stand-alone service
- further processing possible: gluing, cutting, sanding, finishing
- can be combined with OEM manufacturing under one roof
Frequently asked questions about drying
Yes. Customer timber is expressly welcome. You can deliver your own batch, collect it after drying, or have us process it further.
A total of 350 m³: three chambers of 100 m³ each and one chamber of 50 m³.
Depending on species, thickness and initial moisture, roughly 30 to 120 days. Initial moisture is typically around 60 %.
As standard to approx. 7 %. Down to approx. 6 % is possible. Process temperature goes up to 65 °C.
We currently have no formal moisture certificate and no digital process log. The drying process is monitored during processing and the moisture content can be measured before dispatch.
Request contract drying
Tell us the species, volume in m³, thickness and target moisture content. We reply within a maximum of seven days with an assessment of capacity and cycle time.
Direct contact. Communication in English, German or Bosnian.